A versão atual do seu navegador é muito baixa, a fim de oferecer um melhor efeito de navegação, use um navegador de versão superior

Você está aqui: Casa-Produtos- Tools & Spare Parts

Metal Analyzer

HXD-6C intelligent molten iron management instrument has higher measurement accuracy, more stable performance and the most advanced latest generation of molten iron quality management instrument in the country.

1. HXD-6C Introduction

HXD-6C intelligent molten iron management instrument has higher measurement accuracy, more stable performance and the most advanced latest generation of molten iron quality management instrument in the country.

The rapid thermal analysis technology in front of the cast iron furnace takes the solidification temperature curve of the formation process of the cast iron as the measured object, and the instrument analyzes the solidification temperature curve to obtain the characteristic points of the curve under different compositions.

According to the characteristic points of the curve, the hot metal properties such as carbon equivalent CE%, carbon content C%, silicon content Si%, spheroidization rate SG%, tensile strength RM, eutectic degree SC, hardness HB, etc. are calculated. The detection time is about 1 minute and 30 seconds. The detection is completed within the waiting time of the molten iron, and then the composition of the molten iron is adjusted according to the automatically calculated amount of carburizer, ferrosilicon, and scrap.

2. Main Performance

Measurement function: It can measure molten iron brand FC, carbon equivalent CEL, carbon content C%, silicon content Si%, pouring temperature TM, liquidus temperature TL, solidus temperature TS, supercooling degree △ T, spheroidization rate SG %, Tensile strength RM, eutectic SC, hardness HB.

 

Measure Name Measure Range Measurement Accuracy
CE 2.50-4.80 ±0.05%
C% 2.30%-4.30% ±0.04%
Si% 0.60%-3.80% ±0.08%
SG% 62%-95% ±10.0%
RM HTl00-HT350 Min Value

3. Introduction of Detection Interface

1).Detection Main Interface

2).Spheroidization Rate Interface

3).Temperature Measurement Curve Review Interface

JB-TS6 Molten Iron Quality Thermal Analyzer

 

 

 Component measuring

 

 

Nodular measuring for ductile molten iron

 

Technical Parameters:

 

Specifications Host Industrial computer Operating temperature 0~40℃
Monitor 15 inch LCD monitor Relative humidity requirement <90%
Power AC 100/220V 50/60Hz Power consumption 40W
Dimension 410×340×150mm

 

Weight 8 kg
Functions Measuring CEL, C%, Si%, Nodular, Tensile strength, Hardness, Undercooling etc.
Adjustment Calculation After the measurement is completed, the adjustment amount of the alloy is automatically calculated according to the preset material target value and the weight of the molten iron; the user can also temporarily modified the target value of the material and the weight of the molten iron to recalculate the adjusted addition amount of the alloy.
Data storage According to the timing measurements, data of results can be recorded more than 5000 times.
Data output By USB or RJ45 interface.
View Historical Record View historical measurement data, cooling curve etc.
Measuring Range and Accuracy Measuring item Measuring range Measurement accuracy
Resolution 0.1℃(0-1372℃) 0.1%F.S
Carbon equivalent 2.50%~4.80% ±0.08%
Content of Carbon(C%)

 

2.30%~4.20% ±0.05%
 

Content of Silicon(Si%)

0.60%~3.80% ±0.10%
Nodular 60%~99% ±5%
Tensile Strength 150~400MPa ±10MPa
Hardness 100~300HB ±10 HB

Deixe um recado